Ceiling Suspension F350 Tophats
- Designed and manufactured in-house, our Bluseal F500 tophats are an industry first cost-conscious alternative to the PC500 tophat, ideal for large chill or freezer projetcs
- Manufactured from structural grade S280 galvanised steel to ensure quality of product.
- Rather than having the standard 3 drops per tophat, our F350 range utilises the same drop pattern as the industry standard galvanised system. Which means less drops per run.
- Each Bluseal F350 tophat is made to the industry standard 3.6m long and stocked in RAL9003 30% gloss, with other colours available upon request
- We provide you with a starter tophat for each run and a fixed locator plate that all you need to do is screw into the next tophat via the pre-punched and aligned holes
- And these fixings come conveniently bagged within our F350afs kits
- The complete Bluseal F350 Ceiling Suspension kit comes with pre-assembled 500a swivel kits and individually packaged Bluseal F350AFS fixing kits, containing all the fixings you need to safely secure the tophat into place.
- Pre-cut pir and mineral wool strips to suit the tophat are provided, aswell as Armaflex for use in chill/freezer environments
- Less materials used added to less on-site labour hours required = much cheaper costs for you.
- A choice of light gauge push in end cap or heavy duty sloped end cap is available.
- Our systems have been tested to a minimum safe working load of 1000 Kilograms per m2 with a safety factor of 2.
- DWG’s and data sheets available upon request
What is the 500a/500z kit and how do i put it together?
The Bluseal 500z kit is our beam clamp system where a straight drop from pre existing steels is required. The Bluseal 500a kit is the swivel assembly beam system for attaching your drops to angled pre existing steel and is suitable for where a straight drop is required.
No assembly of the beam clamps are requ ired! Bluseal will supply you with a pre assembled kit ready to install. There is no need t o spend valuable time on site putting the pieces together , Just take from the box and fix to the steels!
What fixings do I need to get to fit the tophat to the drop rod?
Bluseal supply as standard with all suspension systems all the fixings that you need. With each tophat you will have a pre packaged bag that includes all of the nuts, washers and bolts you will need for all of the drops being used. This i nclud es al l the fixings needed to join tophat to tophat!
Can I have the bottom capping in a different material and why is it 2m long?
Of course, we can supply this item in any material you want aslong as it is 0 .7mm thick and under. We stock pre made cappings in S8197 WFSL material but hold stock of 2m long material in S5994 Polyester aswell.
Bluseal primarily supply our bottom ca p ping i n 2m lengths for ease of handling and transportation. At 2m this becomes a one man job and also helps to alleviate potential horseshoes/kinks that can occur via manual handling.
Do you supply PIR boards/Mineral Wool slabs for us to cut down on site?
Bluse al will supply pre cut 1.2m lengths of your required infills for both inside the tophat and the void above it. If you tell Bluseal your panel thickness, then we will make sure we supply to suit. We can also obtain and supply full sheets of this material to use on site, but we can do the hard work for you!
I want to supply my own rod, nuts, and washers. Is this ok?
This is absolutely fine, on your point of enquiry please specify what you wish to be removed from the quote and we will do so. However, please note that this cannot be guaranteed by our test results. This only covers the suspension system I f Bluseal supply the full kit. Any modifications made to the Bluseal sys tem would void the test results.
Call now for more information
0845 00 66 777